Product ID:ROYCO 602
MSDS Date:01/12/1994
FSC:9160
NIIN:01-336-7174
MSDS Number: BPVKY

Emergency Phone: 201-887-7411/800-424-9300(CHEMTREC)

Info Phone: 201-887-7410

Preparer: PRODUCT SAFETY

Cage: 07950

Telephone: 973-887-7411/7410

Cage: 07950

POLYALPHAOLEFIN

CAS: 68649-11-6

Fraction By Weight: >98%

MINOR ADDITIVE

Fraction By Weight: <2%

LD50 LC50 Mixture:PRODUCT'S LD50 (ORAL RAT) WAS NOT STATED
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:NO MORE THAN MINIMALLY IRRITATING.
SKIN:NO MORE THAN MILDLY IRRITATING. PROLONGED &/OR REPEATED SKIN
CONTACT CAN RESULT IN DRYING, IRRITATION, DERMATITIS.
INHALATION:MODERATEY TOXIC IF INHALED. VA PORS OR MIST MAY CAUSE
MILD IRRITATION.INGESTION:HARMFUL OR FATAL IF SWALLOWED. ASPIRATION
INTO LUNGS MUST BE AVOIDED.
Explanation of Carcinogenicity:MANUFACTURER GAVE NO INFORMATION ABOUT
CARCINOGENICITY. HMIS FOUND NO LISTING & DOES NOT EXPECT IT TO BE
CARCINOGENIC.
Effects of Overexposure:IRRITATION AS NOTED IN HEALTH HAZARDS.
ASPIRATION PNEUMONITIS MAY BE EVIDENCED BY COUGHING, LABORED
BREATHING, CYANOSIS. IN SEVERE CASES, DEATH. LOCAL NECROSIS IS
EVIDENCED BY DELAYED ONSET OF PAIN & TISSUE DAMAGE A FEW HOURS
FOLLOWING INGECTION.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE, SKIN, AND
RESPIRATORY SYSTEM CONDITIONS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.

First Aid:IF IRRITATION PERSISTS OR IS SEVERE, GET MEDICAL ATTENTION.
EYE:FLUSH W/WATER FOR 15 MIN. SKIN:WASH W/SOAP & WATER. REMOVE
CONTAMINATED CLOTHING & LAUNDER BEFORE REUSE. INHALED:REMOVE FROM
EXPOSURE. A ID OR RESTORE BREATHING AS NEEDED. INGESTED:DO NOT
INDUCE VOMITING. IF VOMITING OCCURS SPONTANEOUSLY, KEEP HEAD BELOW
HIPS TO PREVENT ASPIRATION INTO LUNGS, THEN GET IMMEDIATE MEDICAL
ATTENTION.

Flash Point Method:COC
Flash Point:350F,177C
Lower Limits:N/AV
Upper Limits:N/AV
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
DO NOT USE WATER STREAM, PRODUCT WILL FLOAT AND MAY REIGNITE.
Fire Fighting Procedures:MATERIAL WILL NOT BURN UNLESS PRE-HEATED. WEAR
NIOSH APPROVED POSITIVE PRESSURE SELF-CONTAINED BREATHING APPARATUS
AND FULL BUNKER GEAR FOR CONFINED FIRE SPACE.
Unusual Fire/Explosion Hazard:COOL FIRE EXPOSED CONTAINERS W/WATER

Spill Release Procedures:NOT READILY IGNITABLE. USE CAUTION W/LARGE
SPILLS. SMALL:TAKE UP W/ABSORBENT MATERIAL. LARGE:WEAR PROTECTIVE
EQUIPMENT. SHUT OFF SOURCE OF LEAK IF SAFE. DIKE & CONTAIN. REMOVE
W/VACUUM TRUCK OR PUMP T O SALVAGE VESSEL. SOAK UP RESIDUE
W/ABSORBENT.
Neutralizing Agent:MFR GAVE NO INFORMATION ON MSDS.

Handling and Storage Precautions:STORE IN A COOL DRY PLACE W/ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAMES & HIGH TEMPERATURES.
Other Precautions:AVOID BREATHING VAPORS OR MISTS. MINIMIZE EYE AND
SKIN CONTACT. WASH WITH SOAP AND WATER BEFORE EATING, DRINKING,
SMOKING, APPLYING COSMETICS OR USING TOILET FACILITIES. LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.

Respiratory Protection:USE A NIOSH APPROVED RESPIRATOR AS REQUIRED TO
PREVENT OVEREXPOSURE. I/A/W 29CFR1910.134, USE EITHAR AN ATMOSPHERE
SUPPLYING RESPIRATOR OR AN AIR PURIFYING RESPIRATOR FOR ORGANIC
VAPORS.
Ventilation:NO INFORMATION GIVEN ON MSDS BY MFR. HMIS: USE GENERAL
VENTILATION OR LOCAL EXHAUST TO KEEP EXPOSURES BELOW PEL/TLV.
Protective Gloves:NITRILE GLOVES TO MINIMIZE CONTACT
Eye Protection:SPECIAL PROTECTION NOT ROUTINELY NEEDED
Other Protective Equipment:WEAR PROTECTIVE CLOTHING TO MINIMIZE
CONTACT. HMIS: WEAR SAFETY GLASSES AND IF SPLASHING LIKELY, GOGGLES
OR FACE SHIELD.
Work Hygienic Practices:MFR:?. HMIS:USE GOOD CHEMICAL HYGIENE
PRACTICES. AVOID CONTACT IF AT ALL POSSIBLE. WASH THOROUGHLY AFTER
HANDLING.
Supplemental Safety and Health

HCC:V6
NRC/State Lic Num:NONE
Melt/Freeze Pt:M.P/F.P Text:-100F,-73C
Spec Gravity:0.7990
Viscosity:5.3 CST
Evaporation Rate & Reference:N/AV
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, NO ODOR.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACR W/STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID HEAT, FLAME
Hazardous Decomposition Products:A COMPLEX MIXTURE OF AIRBORN SOLID,
LIQUID, PARTICULATES & GASES EVOLVES FROM PYROLYSIS OR COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:PLACE IN AN APPROPRIATE DISPOSAL FACILITY I/A/W
FEDERAL, STATE AND LOCAL REGULATIONS. THIS PRODUCT IS CONSIDERED AN
OIL UNDER EPA AND ANY SPILL INTO OR LEADING TO SURFACE WATERS THAT
CAUSES A SHEEN MU ST BE REPORTED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.